Súng đo nhiệt độ hồng ngoại PCE, PCE-888(-50 ~200°C)

3.600.000 
Mã sản phẩm: 863
Liên hệ trực tiếp

Thông số kỹ thuật:

Hãng sản xuất: PCE- Anh

Bảo hành: 12 Tháng

Khoảng đo: -50 ~ 550°C

Độ phân giải: 0.1°C (từ -50 ~200°C)

                        1°C (từ 201 ~ 550°C)

Độ chính xác: ±5°C  trong khoảng từ -50 ~ -20°C,

                        (Trên khoảng đó) ±1.5% của giá trị đo ±2°C

Thời gian đáp ứng: &LT500ms

Tốc độ đo: 2.5 lần trên giây

Khoảng nhiệt độ môi trường: 0 ~ 50°C

Nguồn: Pin 9V

Kích thước: 230 x 56 x 100mm

Khối lượng: 290g

Tỉ lệ khoảng cách đo (khoảng cách/kích thước điểm quan sát): 16 : 1

Mức phát xạ hồng ngoại( điều chỉnh được): 0.1 ~ 1

Tia Laser chỉ điểm: Điểm chiếu tia laser nhìn thấy được

Loại Laser: II (đầu ra &LT1mV, bước sóng từ 630 ~ 670nm)

Đèn nền  LCD: có

Cung cấp bao gồm

Nhiệt kế hồng ngoại PCE-888, pin, hộp đựng và hướng dẫn sử dụng.

 the PCE-888 pyrometer infrared and accurate to within ±1.5%, for measuring surface temperature without contact.

PCE-888 pyrometer

infrared and accurate to within ±1.5%, for measuring surface temperature without contact

The PCE-888 pyrometer is ergonomic and easy to carry from one place to another. This light infrared pyrometer is attractive due to its size and its accuracy which derives from its visible laser pointer. The pyrometer was designed for industrial use and for professionals working in inspection and maintenance of heating systems, ventilation systems, air conditioning units, in the automotive industry, for electrical systems and fuse boxes, as well as for pilot installations and test positions.

The pyrometer can be used in adverse conditions. It has a backlit LCD. The device has a visible laser to quickly and accurately target the area to be measured. This allows for measurements to be taken at certain distances if the object being measured it hot or difficult to access. The emissivity can be adjusted between 0.1 and 1, and covers 90% of possible measurements taken. 

Please note that when measuring an object, the surface area being measured must be bigger than the surface area of the visible laser pointer. To decrease the size of the laser pointer, the distance between the object and pyrometer must be decreased.

– Large backlit LCD with 3.5 digits showing a maximum value of 1,999

– Shows readings in °C or °F

– Auto shut-off after 7 minutes of inactivity

– Retains current values

– Good ratio between distance and point of measurement of 16 : 1 (approximate diameter of measurement point: 25mm at a distance of about 40cm, 50mm at 80cm, 100mm at 1.6m and 200mm at 3.2m)

– Includes battery and user’s manual

– Pre-installed mount for tripod



the PCE-888 pyrometer infrared and accurate to within ±1.5%, for measuring surface temperature without contact.  

PCE-888 pyrometer

View or print the user’s manual

PCE-888 pyrometer: the user's manual

Ratio between measurement distance and size of measurment point of 16 : 1



Ratio between measurement distance and size of measurment point of 16 : 1 

 

Technical specifications
Measurement range -50 to 550°C
Resolution 0.1°C (between -50 and 200°C)

1°C (between 201 and 550°C)
Accuracy ±5°C at -50 to -20°C,

above range ±1.5% of readings ±2°C
Response time &LT500ms
Measurement rate 2.5 times per second
Ambient temperature range 0 to 50°C
Power 9V battery
Dimensions 230 x 56 x 100mm
Weight 290g
Measurement point (ratio of distance to size) 16 : 1
Emissivity (variable) 0.1 to 1
Laser pointer visible laser point
Laser class II (output &LT1mV, wave length of 630 – 670nm)
Backlit LCD yes

Contents

PCE-888 pyrometer, battery, carrying case and user’s manual

XEM ĐẦY ĐỦ

Bình luận.

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Súng đo nhiệt độ hồng ngoại PCE, PCE-888(-50 ~200°C)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *