Thiết bị đo LCR để bàn IETLABS- Mỹ , Model 1920

Liên hệ
Mã sản phẩm: 148
Liên hệ trực tiếp

Thông tin cơ bản:

Hãng sản xuất: IETLABS- Mỹ

Xuất xứ: Mỹ

Bảo hành: 12 Tháng

Thông số kỹ thuật:

Tham số

Dải đo

Cấp chính xác

Nhanh

Trung bình

Chậm

Ls,Lp

0.001 nH to 99.999 H

+/-0.5%

+/-0.25%

+/-0.1%

Cs,Cp

1 pF to 9.9999 F

+/-0.5%

+/-0.25%

+/-0.1%

DF

0.00001 to 99.999

+/-0.005

+/-0.0025

+/-0.001

Q

0.00000 to 9999.9

+/-0.005

+/-0.0025

+/-0.001

Y,Gp,Bp

10 nS to 9999.9 S

+/-0.005

+/-0.0025

+/-0.001

|Z|,Rs,Rp,Xs,ESR

0.0001 mΩ to 99.999 MΩ

+/-0.5%

+/-0.25%

+/-0.1%

Góc pha

-180.00 to +179.99 degrees

+/-1.8°

+/-0.9°

+/-0.18°

DCR

0.1 mVto 100 KV

+/-0.5%

+/-0.25%

+/-0.1%

DUT AC Voltage

20 mV to 1.0 V

+/-2%

+/-2%

+/-2%

DUT AC Current

1 μA to 150 mA

+/-2%

+/-2%

+/-2%

DUT DC Voltage

20 mV to 1.0 V

+/-2%

+/-2%

+/-2%

DUT DC Current

1 μA to 150 mA

+/-2%

+/-2%

+/-2%

Dải tần số: 20 Hz to 1 MHz, Continuous
Độ phân giải: 1 Hz from 20 Hz to 1 kHz, 4 digits >1 kHz
Cấp chính xác: +/- (0.02% +0.02 Hz)
Tốc độ đo: Nhanh: 40 meas/sec;  Trung bình: 8 meas/sec;  Chậm: 1 meas/sec
Ranging:  Automatic,Range Hold or user selectable
Trigger:  internal (automatic), External(via RS-232,IEEE-488.2, Handler interfaces or Manual
Trở kháng nguồn: 5, 25, 50, 100 ohms selectable
AC Test Signal:  Voltage: 20 mV to 1.0 V (open circuit) in 5 mV steps
DC Bias Current:  Internal: 0.0 to 1.0 A in 1 mA steps External: up to 20.0 A
Standard Interfaces:  IEEE-488.2 • RS-232 • Handler • Serial Printer
Measurement Delay:  Programmable from 0 to 1000 ms in 1 ms steps
Averaging:  Programmable from 1 to 1000
Median Value: Averaged over last three measurements
Built-in automatic calibration procedure
Test Terminals:  Front panel, four terminal (BNC) Optional Test Fixtures Available

IET/QuadTech 1910/1920 1 MHz LCR Meter

 

  • 20 Hz to 1 MHz Frequency Range 27,000 Possible Frequency Options
  • 0.1% Basic Measurement Accuracy
  • Measures 15 Impedance Parameters, DC Resistance, Voltage and Current
  • IEEE-488.2,RS-232, handler, and serial printer interfaces all standard
  • Wide Measurement Range with 5 Digit Measurement Resolution
  • Four-terminal Kelvin connections to maintain measurement integrity

Measured Parameters and Basic Measurement Accuracy:

Parameter Measurement Range Fast Medium Slow
Ls,Lp 0.001 nH to 99.999 H +/-0.5% +/-0.25% +/-0.1%
Cs,Cp 1 pF to 9.9999 F +/-0.5% +/-0.25% +/-0.1%
DF 0.00001 to 99.999 +/-0.005 +/-0.0025 +/-0.001
Q 0.00000 to 9999.9 +/-0.005 +/-0.0025 +/-0.001
Y,Gp,Bp 10 nS to 9999.9 S +/-0.005 +/-0.0025 +/-0.001
|Z|,Rs,Rp,Xs,ESR 0.0001 mΩ to 99.999 MΩ +/-0.5% +/-0.25% +/-0.1%
Phase Angle -180.00 to +179.99 degrees +/-1.8° +/-0.9° +/-0.18°
DCR 0.1 mVto 100 KV +/-0.5% +/-0.25% +/-0.1%
DUT AC Voltage 20 mV to 1.0 V +/-2% +/-2% +/-2%
DUT AC Current 1 μA to 150 mA +/-2% +/-2% +/-2%
DUT DC Voltage 20 mV to 1.0 V +/-2% +/-2% +/-2%
DUT DC Current 1 μA to 150 mA +/-2% +/-2% +/-2%

*At optimum test signal levels, frequencies, DUT values and without calibration uncertainty. Capacitance (Cs/Cp), Inductance (Ls/Lp), Resistance (Rs/Rp), Dissipation (D) and Quality (Q) Factors, Impedance Z , Admittance Y , Phase Angle (0-), Equivalent Series Resistance (ESR), Conductance (Gp), Reactance (Xs), Susceptance (Bp) Note: s = series, p = parallel, ESR equivalent to Rs
Test Frequency Range: 20 Hz to 1 MHz, Continuous
Test Frequency Resolution: 1 Hz from 20 Hz to 1 kHz, 4 digits >1 kHz
Test Frequency Accuracy: +/- (0.02% +0.02 Hz)
Measurement Speed: Fast: 40 meas/sec Medium: 8 meas/sec Slow 1 meas/sec
Ranging Automatic,Range Hold or user selectable
Trigger internal (automatic), External(via RS-232,IEEE-488.2, Handler interfaces or Manual
Source Impedance 5, 25, 50, 100 ohms selectable
AC Test Signal Voltage: 20 mV to 1.0 V (open circuit) in 5 mV steps
DC Bias Current Internal: 0.0 to 1.0 A in 1 mA steps External: up to 20.0 A
Standard Interfaces IEEE-488.2 • RS-232 • Handler • Serial Printer
Measurement Delay Programmable from 0 to 1000 ms in 1 ms steps
Averaging Programmable from 1 to 1000
Median Value Averaged over last three measurements
Built-in automatic calibration procedure
Test Terminals Front panel, four terminal (BNC) Optional Test Fixtures Available
Dimensions: 17x 5.25x 16in (432x 133x 406 mm)
Weight: 15lbs (8kg) net, 21lbs (9.9kg) shipped

 

XEM ĐẦY ĐỦ

Bình luận.

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Thiết bị đo LCR để bàn IETLABS- Mỹ , Model 1920”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *